- [Narrator] In this video you will learn how to load the Scott Essential Roll Towel Dispenser. Open the front cover using the pushbutton or key. Remove the used core. The Scott Essential Dispenser System combines a color-coded core plug and matching roll holders, only the core plugs and matching roll holders will work together. Thread the sheet into the dispenser mechanism by placing the tail under the white stationary roll holder shaft while rotating the emergency feed knob. Once the sheet is threaded around the drum and can be seen near the dispenser opening, close the dispenser door firmly and begin dispensing. In this portion of the video, we will learn how to load the stub roll. When the main roll is approximately three inches in diameter, or about the same size as the diameter of the main roll holders, we recommend you move the roll from the main hubs to the stub roll tray. Holding a new roll, move the flexible roll holder arm out to the side, allowing the roll to clip into place between the two roll holder arms. Place the corners of the tail from the new roll under the two blue clips, located on top of the stationary roll shaft. Close the dispenser door firmly and begin dispensing.